Features
- Reduced-Emission Engine Technology—Caring for Nature –
  
  The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
- Adjustable Automatic Oiler –
  
  The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
- Anti-Vibration System –
  
  STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- STIHL ElastoStart™ –
  
  The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
- STIHL M-Tronic™ –
  
  This product features M-Tronic™ (M) – a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
- IntelliCarb™ Compensating Carburetor –
  
  The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
- Side-Access Chain Tensioner –
  
  The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
- Wrap Handle (R) –
  
  Saw can be used in multiple positions for felling or limbing with hands in the proper positions.
- STIHL Quickstop® –
  
  STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
- Ematic™ Lubrication System –
  
  The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
- Master Control Lever™ –
  
  The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
- Decompression Valve –
  
  The decompression valve, also referred to as ‘deco’ or ‘deco valve’, vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
- Winter/Summer Shutter –
  
  The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).

Specifications

POWER SOURCE	Gas
POWERHEAD WEIGHT	13.2 lbs.
GUIDE BAR LENGTH (Recommended)	20 in.
OILOMATIC® CHAIN	3/8″ RS3
CHAIN OIL CAPACITY	11 oz.
ENGINE POWER	4.69 bhp
FUEL CAPACITY	20.3 oz.
DISPLACEMENT	59.0 cc

Note: STIHL recommends #3624 (33 RS3 72) OILOMATIC® saw chain and 20″ 3003 008 8921 Ematic™ guide bar combination. Compatible guide bar ranges: 16″ to 25″

Warnings and Safety

* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.

IMPORTANT SAFETY INFORMATION The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop chain brake, STIHL Quickstop Plus additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains.

STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.

Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty.

Proposition 65 Warning: Cancer and Reproductive Harm

WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand, and follow carefully the operating and safety instructions in your instruction manual before using such products.

WHATSAPP +1 (706) 681-2990 | 25% OF BITCOIN PAYMENT

MS 362 R C-M

Reduced-Emission Engine Technology—Caring for Nature –

Adjustable Automatic Oiler –

Anti-Vibration System –

STIHL ElastoStart™ –

STIHL M-Tronic™ –

IntelliCarb™ Compensating Carburetor –

Side-Access Chain Tensioner –

Wrap Handle (R) –

STIHL Quickstop® –

Ematic™ Lubrication System –

Master Control Lever™ –

Decompression Valve –

Winter/Summer Shutter –

MS 291

MS 271 FARM BOSS®

STIHL MS 661 C-M PROFESSIONAL CHAINSAW

Stihl MS 311 Chainsaw

Stihl MS 251 Chainsaw

Stihl MS 211 C-BE Chainsaw

Stihl MS 194T In-Tree Professional Chainsaw

Stihl MS 170 Chainsaw

We're one of the biggest garden machinery dealers in the country.