Features
- Ematic™ Lubrication System –
  
  The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
- STIHL Easy2Start™ (E) –
  
  The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
- STIHL M-Tronic™ –
  
  This product features M-Tronic™ (M) – a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
- STIHL Quickstop® –
  
  STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
- Adjustable Automatic Oiler –
  
  The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
- Bumper Spikes –
  
  These spikes prevent pull-in and provide better control, making cutting easier.
- Translucent Fuel Tank –
  
  The semi-transparency allows operators to easily check the fuel level before starting work.
- Toolless Fuel and Oil Caps with Retainers –
  
  Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
- Side-Access Chain Tensioner –
  
  The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
- Anti-Vibration System –
  
  STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
- Throttle Trigger Interlock –
  
  This safety feature must be depressed before the trigger can be activated.
- High-Tech Polymer Housings –
  
  Housings are lightweight, withstand greater impact, and are corrosion-resistant.
- Reduced-Emission Engine Technology—Caring for Nature –
  
  The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications

POWER SOURCE	Gas
POWERHEAD WEIGHT	9.0 lbs.
GUIDE BAR LENGTH (Recommended)	14 in.
OILOMATIC® CHAIN	3/8″ PS3
CHAIN OIL CAPACITY	7.4 oz.
ENGINE POWER	2.41 bhp
FUEL CAPACITY	10.5 oz.
DISPLACEMENT	35.2 cc

Note: STIHL recommends #3616 (63 PS3 50) OILOMATIC® saw chain and 14″ 3005 000 4809 Ematic™ guide bar combination. Compatible guide bar ranges: 12″ to 16″. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. Dry weight and powerhead only.

Warnings and Safety

Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty.

IMPORTANT SAFETY INFORMATION The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains.

STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.

* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.

WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand, and follow carefully the operating and safety instructions in your instruction manual before using such products.

WHATSAPP +1 (706) 681-2990 | 25% OF BITCOIN PAYMENT

MS 201 C-EM

Ematic™ Lubrication System –

STIHL Easy2Start™ (E) –

STIHL M-Tronic™ –

STIHL Quickstop® –

Adjustable Automatic Oiler –

Bumper Spikes –

Translucent Fuel Tank –

Toolless Fuel and Oil Caps with Retainers –

Side-Access Chain Tensioner –

Anti-Vibration System –

Throttle Trigger Interlock –

High-Tech Polymer Housings –

Reduced-Emission Engine Technology—Caring for Nature –

MS 311

MSA 120 C-B

MS 291

MS 180 C-BE

Stihl MSA 120 C-BQ-12in-SET Battery Chainsaw

STIHL MS 271 CHAINSAW

Stihl MS 291 Chainsaw

Stihl MS 211 C-BE Chainsaw

We're one of the biggest garden machinery dealers in the country.