Features
- STIHL Quickstop® Plus –
  
  STIHL offers an additional, manually-activated chain brake on select models. This system is designed to engage when the operator’s right hand completely releases the rear handle, stopping the chain within one second.
- Ematic™ Lubrication System –
  
  The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
- STIHL Electric Motor –
  
  Lightweight and compact, STIHL electric motors require minimal maintenance and feature low noise levels and reduced vibration.
- Lightweight Portability –
  
  This product is lightweight for easy portability, great maneuverability, and extended use.
- Toolless and Translucent Bar and Chain Oil Tank –
  
  The translucent bar and chain oil tank makes it easy for users to check oil levels at a glance.
- Side-Access Chain Tensioner –
  
  The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
- Throttle Trigger Interlock –
  
  This safety feature must be depressed before the trigger can be activated.
- Reduced-Emission Engine Technology—Caring for Nature –
  
  The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications

POWER SOURCE	Battery
POWERHEAD WEIGHT	4.6 lbs.
WEIGHT (w/ AP 200)	7.5 lbs.
GUIDE BAR LENGTH (Recommended)	12 in.
OILOMATIC® CHAIN	1/4″ PM3
CHAIN OIL CAPACITY	3.6 oz.
BATTERY SYSTEM	AP System
RUN TIME (w/ AP 200) UP TO	42 min.
VOLTAGE	36 volt

Note: This product is for professional use only. STIHL recommends #3670 (71 PM3 65) OILOMATIC® saw chain and 12″ 3005 008 3405 guide bar combination. Chain saw weights include recommended bar and chain combination. Compatible guide bar ranges: 10″ to 12″. The battery working time specifications for each battery charge are estimates and may vary depending on how the tool is used and what is being cut.

Warnings and Safety

IMPORTANT SAFETY INFORMATION The occurrence called “kickback” can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and §30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop® chain brake, STIHL Quickstop® Plus additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains.

STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.

* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.

WARNING FOR CORDED ELECTRIC AND BATTERY CHAINSAW USERS! The fibers may not stop the sprocket on most corded electric chainsaws and some battery-powered chainsaws because of the constant high torque. However, to reduce the severity of injury from accidental contact with the chain, STIHL recommends that leg protection be worn when operating these types of chainsaws.

WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand, and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.