Toro Mid-Size Walk-Behind 36″ Fixed Deck Gear Drive T-Bar (39674)

T-Bar Steering Controls

Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.

Exclusive TURBO FORCE Deck

High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4″ (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and fall clean-up also is significantly reduced.

Rugged Spindle Assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8″ (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.

Extended Life Drive System

Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Toro Mid-Size Walk-Behind 36″ Fixed Deck Gear Drive T-Bar (39674) Specifications

• Engine – 14.5 HP* Kawasaki® FS481V 603cc
• Fuel Capacity – 5 gallons (19 L)
• Height of Cut – 1″ to 4-1/4″ in 1/8″ increments (2.5 cm to 10.8 cm in 3 mm increments
• Number of Blades – 2
• Starter – Recoil
• Drive System – 5-Speed Transmission
• Mulch, Bag, Side Discharge – Side-discharge standard
• Air Filter – 2-Stage Air Cleaner
• Adjustable Discharge – Standard
• Blade Tip Speed – 18,500 ft/min (5639 m/min)
• Brake System – 6″ (15 cm) Band Brakes
• Caster Tires – 9″ x 3.50-4″ (23 cm x 9 – 10 cm) Flat-free
• Deck Design – 36″ (91.4 cm) TURBO FORCE
• Discharge Chute – High-performance 5/16″ (8 mm) rubber
• Drive Tires – 13″ x 6.50-6″ (33 cm x 15.2 – 16.5 cm)
• Ground Speed – 6.2 mph (10 km/h) fwd; reverse assist
• Height – 41″ (104 cm)
• Horsepower – 14.5 hp
• Length – 74″ (188 cm)
• Spindle Housing – Cast iron with 9-3/8″ (24 cm) base
• Steering Controls – T-Bar
• Transmission – 5-speed gearbox with 9 spline coupler
• Width – 37.1″ (94 cm) with chute up
• Weight – 460 lbs (208 kg)